|
Pair of 2M long magnetic door seals, usually found on Quads or Sliding Doors & 2x pairs of 2 metre vertical door fins to stop water splashing out between a door and glass panel.
•This listing is for a pair of magnetic door seals that fit over the glass on shower doors with 10mm glass. The magnets are made at a slight angle meaning that they can be used on either sliding doors that come together straight, or if you turn one seal up the other way they come together at a slight angle which then makes them suitable for sliding doors on quadrant shower enclosures.
•The maximum gap they can span between to glass doors is 20mm. To check if you remove the old magnetic seals from your shower door, close the doors and measure the gap between the two doors when in the closed position, as long as the gap between the two glass doors is 20mm or less then they should fit fine.
•If you are unsure please send us a small piece of your old seal first and we will try to match it up for you.
•These seals fit all types of straight or quadrant sliding doors with the above measurements. Please note they are not suitable for pivot doors that close at an angle of 90 degrees
•Simply remove your old magnetic seals from the glass, cut the new magnetic seal to length, turn the seals over to make them suitable for either a straight or quadrant door and push the new magnetic seal on to the glass doors
For more info-
info@showersealuk.com
www.showersealuk.com
phone - 01634272224
|
