|
WINDOWS AND DOORS TAL-90
TIMBER AND TIMBER-ALUMINIUM
UK Head Office:
DEERE HART PRODUCTS
17 Cherry Way
Shepperton
Middx TW17 8QQ, UK
+44(0) 1932 703145
+44(0) 7904 4244190
enquiries@deerehart.com
Timber windows- description:
Windows are made using laminated (engineered) timber, spruce, three layer radial cut.
Wood is profiled using razor knives, EURO falc 68 standard.
The window profile has a decompressed system, whitch reduces the air pressure and therefore does
not load the rubber seal.
Window is supplied with a groove which prevents the glass condensation forming that can cause the wood to deteriorate.
A combination of vents, grooves, a decompression system and impregnation prevents (acid) rain and salt
from forming of the glass and the window.
Windows are painted with a water based paint, using an airless system at 400 bar pressure.
They are finished with a water based varnish which prevents the effects of UV and (acid) rain
from causing changes and reactions in the wood.
Timber-aluminium windows - descriptions:
Windows are made in Wood-Aluminium combination, thermal and EN 14351 category tested.
System SMAJ 68+ is made to highest standards and Eurofalc 68.
TAL combination is ideal for climate changes, UV and (acid) rain.
Water based paint and impregnation applied using airless system at 400 bar pressure,
makes the window durable, resistant and stylish.
Windows are supplied with EPDM rubber seal +60 for triple tighthess and sound insulation.
Timber:
Laminated spruce, oak or mahagony; three layers. Visible side has radial cut all in one,
the other two layers are bonded.
Timber treatment:
Under our own control, using tools made for each project according to the client's requirements.
Angle joining of wood is done by Hoffman technology, using Hoffman machinery.
Two types of wood joining are possible: angle and CNC (using CNC machinery).
Glass:
4+15+4 low.
Other types of glass are available, depending of client's requirements.
Low transmission... 4+9+4+9+4 low.
Timber Painting:
Using ECO water based paint.
Painting Process:
Impregnation - base - background colour - two layers of final clear varnish.
Seals:
EPDM rubber seal, 55 - 60 hardness, temperature 60C to -100C, po DIN-u 54504, 53505, 54509.
Aluminium profiles alloy AlMgSi0.5 F 22. Profile geometry DIN M5296, M5295.
Powder coating thinkness 60-80 microns, as recommended by RAL.
Covering:
Client's choice. Maco, Sigenia or Vabis.
Inclusion of blind and vent systems is possible.
|
